Electrical data
Important
All electrical work should be
performed by a qualified electricianThe hood must be hard wired
in strict accordance with nationalaccordingly:
and local safety regulations.Black/Red wire:. . . . connect to L1 (live)
Installation, repairs and other work
by unqualified persons could beWhite wire: . . . . . connect to N (neutral)
dangerous. The manufacturer canGreen wire: . . connect to GND (ground)
not be held responsible for
unauthorized work.
Ensure that power to the appliance
is OFF while installation or repair
work is performed.Maximum load. . . . . . . . . . . . . . . 450 W
Verify that the voltage, load and circuitOverhead lighting . . . . . . . . . . 4 x 20 W
rating information found on the dataIndirect lighting . . . . . . . . . . . . 2 x 10 W
plate (located behind the greaseVoltage . . . . . . . . . . . . . . . . . . . . . 120 V
filters), match the household electrical
supply before installing the hood.Frequency . . . . . . . . . . . . . . . . . . 60 Hz
Circuit rating. . . . . . . . . . . . . . . . . . 15 A
If there is any question concerning the
electrical connection of this appliance
to your power supply, please consult a
licensed electrician or call Miele?s
Technical Service Department.
USA1-800-999-1360
CDN 1-800-565-6435
WARNING:
THIS APPLIANCE MUST BE
GROUNDED
25 |